|
|
 |
 |
Home>Main
Products>Tablet
Making Machine (Rotary Tabletting Machine)
"SH " Series
High-Speed Single-Sided Rotary Tabletting Machine
Models: JC-SH-31D/JC-SH-39DB/JC-SH-39B/JC-SH-47BB |
| |
|
|
|
|
Accurate
tabletting |
|
|
Compression
in two stages |
|
|
Tabletting
compartment separated from drive mechanism
|
|
|
Mechanical
compresssion system |
|
|
Easy
maintenance & cleaning |
|
|
Meets
GMP. |
|
| ................................................................................................................................... |
|
|
| HAVE
PROVEN TO BE RELIABLE FOR: |
| Efficient
large size production runs, withcapacity upto
169,000 tablet per hour. |
| |
| MACHINE
DRIVE COMPLETELY SEPARATED FROM PRODUCTION
AREA |
| Direct
rotation of the turret by the main shaftreduces
the noise level. The gearbox, with a casehardened
nickel steel ground worm and bronze wormwheel
(dia 500mm), it provides maximum protection
to the gears and the drive system. |
|
 |
 |
| *
Operator control panel
is designed with controls and indicating devices
to minimize operator attention. |
|
| ................................................................................................................................... |
|
|
| SAFETY
DEVICE |
| Upper
punch monitoring device is available that
would switch off the machine in the event
of punch tightness. |
|
| MECHANICAL
FEEDER |
| The
two chambers feeding system is driven from
top by a variable speed motor. The unit can
be easily assembled or disassembled for cleaning. |
| |
| PRE-COMPRESSION
AND MAIN COMPRESSION |
| For
successful high speed tablet production of
difficult and direct compression material,
the large diameter of pre-compression roll
(196mm)increase punch dwell times and allows
for difficult formulations to be processed
at high speed without loss of tablet quality. |
|
| CLEANING
AND TOOL CHANGEOVER |
| The
detachable panels can be removed easily, to
expose the entire lower punch cams, and simplify
the removal of lower punches & dies. |
|
| UPPER
& LOWER PUNCH SEALS |
| The
scrapers seals for the upper punches protect
tablets from oil dripping, while the dust
seals on the lowers prevent the punches from
binding and reduce wear on the cam. This features
combined with an efficient dust extraction
system allows prolonged run with minimum downtime
for cleaning. |
|
| .................................................................................................................................. |
Specifications:
|
MODEL
|
JC-SH-310
|
JC-SH-
39DB
|
JC-SH-
39B
|
JC-SH-47BB
|
| Type
of tooling |
IPT"D"
EU"D"
|
IPT"D"
EU"D"
|
IPT"B"
EU"B"
|
IPT"BB"
EU"BB"
|
| Number
of station |
31
|
39
|
39
|
47
|
| Maximum
Table diameter |
25.4mm
1"
|
19mm(caplet)
(3/4")
|
16mm
(5/8")
|
13mm
(33/64")
|
Production
capactity
(tablets/hour) * |
27,900-111,600
|
35,100-140,000
|
42,300-169,000
|
Revolution
of turret / Min
(60 cyc)*
|
15-60
RPM
|
| Depth
of fill adjustable to |
19mm
(3/4")
|
17mm
(43/64")
|
| Maximum
operating pressure |
10,000kgs
(22,000lb)
|
6,000kgs
(13,200lb)
|
| Maximum
pre-pressure |
10,000kgs
(22,000lb)
|
6,000kgs
(13,200lb)
|
| Diameter
of die |
38.1mm
(1.5")
|
30.16mm
(1.1875")
|
24mm(0.945")
|
| Height
of die |
23.81mm
(0.9375")
|
22.22mm
(0.945")
|
| Nominal
diameter of punch body |
25.4
mm (1")
|
19
mm(3/4")
|
| Overall
Length of upper Punch |
IPT
133.35 mm (5.25") or EU 133.6 mm
|
| Overall
Length of lower Punch |
IPT
133.35 mm (5.25") or EU 133.6 mm
|
| Turret
P.C.D |
490
mm
|
| Power
consumption |
5HP
(3.7kw)
|
| Machine
dimensions |
900x1100x1750mm(H)
(not including hopper)
|
|
*Subjest
to the characteristics of the power.
*The manufacturer
reserves the right to modifty the design,
specifiaction, etc., to improve
the performance of the machine without notice.
All the specifiaction shown are reference
only. |
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
Chin
Yi Machinery Co., Ltd
|
|
No.2,
Lane 302, Shinshu Rd, Shinjuang City, Taipei,
TAIWAN,R.O.C
|
|
Tel:
|
886-2-22053988 |
|
Fax:
|
886-2-22059696 |
|
|
|
| |
|
| |
|
|
|
|
